Scanner Status Message Table - Panasonic KV-S7065C Reference Manual

5 Scanner status message table

The messages and error codes corresponding to the scanner statuses are displayed on the main dialog box.
Error codes are displayed as a combination of [error category] - [internal code].
After referring to the table below, take the suggested remedial action that corresponds to the scanner status
displayed.
Error
catego- Scanner Status message
ry
— Scanner has no error.
U11 A paper jam has occurred.
Open the scanner's door, re-
U12
move the documents, and
close the door. Place the docu-
U13
ments back in the document
feed tray.
A paper jam or double feed has
occurred.
Open the scanner's door, re-
move the documents, and
close the door. Place the docu-
ments back in the document
feed tray.
U14
(For KV-S1025C and
KV-S1020C only)
U15
U16
U17
U18 Paper remains in the Scanner.
Open the scanner's door, re-
move the documents, and
close the door. Place the docu-
ments back in the document
feed tray.
U20 A skew error has occurred.
Open the scanner's door, re-
move the documents, and
close the door. Place the docu-
ments back in the document
feed tray.
Cause
1.
The paper has jammed in
the feed tray area.
2.
The paper sensor is dirty.
(For other models except
KV-S1025C and
KV-S1020C)
3.
Paper Feed Roller Cover or
Double-Feed Prevention
Roller Cover is not closed
properly.
(For KV-S1025C and
KV-S1020C only)
1.
The paper has jammed in
the exit area.
2.
The paper sensor is dirty.
(For other models except
KV-S1025C and
KV-S1020C)
1.
Paper has been left in the
scanner.
2.
The paper sensor is dirty.
(For other models except
KV-S1025C and
KV-S1020C)
1.
A skew error has occurred.
(For KV-S7065C,
KV-S4085CW,
KV-S4085CL,
KV-S4065CW,
KV-S4065CL,
KV-S3065CW, and
KV-S3065CL only)
Remedial action
1.
Open the door, and remove
the paper.
2.
Clean the paper sensors.
(For other models except
KV-S1025C and
KV-S1020C)
3.
Make sure that the Paper
Feed Roller Cover or
Double-Feed Prevention
Roller Cover is closed
properly.
(For KV-S1025C and
KV-S1020C only)
1.
Open the door, and remove
the paper.
2.
Clean the paper sensors.
(For other models except
KV-S1025C and
KV-S1020C)
1.
Open the door, and remove
all the paper left inside.
2.
Clean the paper sensors.
(For other models except
KV-S1025C and
KV-S1020C)
1.
Open the door, and remove
all the paper left inside.
User Utility Reference Manual 29