Update All Counters] Button - Panasonic KV-S7065C Reference Manual

4.1.11 [Update All Counters] button

Note
•
The flatbed counter is saved every 10 counts.
After the scanning, the counter displays the number of pages scanned.
However, after the scanner's power is turned off and on, the counter displays the numbers rounded
down to the ten's place.
Example of the flatbed counter indication:
Counter indication just after scanning 48 pages:
Counter indication just after turning the scanner off and on:
[After Clean Roller]
•
This displays the number of pages scanned up to the present moment, after the rollers were last cleaned.
•
[Caution]
The rollers must be cleaned after the indicated number of pages is scanned.
•
When the [After Clean Roller] counter is greater than the [Caution] counter, the rollers need to be cleaned.
[After Replace Roller] (For other models except KV-S1025C and KV-S1020C)
•
This displays the number of pages scanned after the rollers were last replaced up to the present moment.
•
[Caution]
The rollers must be replaced after the indicated number of pages is scanned.
•
When the [After Replace Roller] counter is greater than the [Caution] counter, the rollers need to be
replaced.
[After Replace "Double-feed Prevention Roller"] (For KV-S1025C and KV-S1020C only)
•
This displays the number of pages scanned after the "Double-feed Prevention Roller" was last replaced
up to the present moment.
•
[Caution]
The "Double-feed Prevention Roller" must be replaced after the indicated number of pages is scanned.
•
When the [After Replace "Double-feed Prevention Roller"] counter is greater than the [Caution] counter,
the roller needs to be replaced.
[After Replace "Paper Feed Roller"] (For KV-S1025C and KV-S1020C only)
•
This displays the number of pages scanned after the "Paper Feed Roller" was last replaced up to the
present moment.
•
[Caution]
The "Paper Feed Roller" must be replaced after the indicated number of pages is scanned.
•
When the [After Replace "Paper Feed Roller"] counter is greater than the [Caution] counter, the roller needs
to be replaced.
4.1.11 [Update All Counters] button
Press this to update the counter displays of the scanner. Document scanning does not cause the counter
displays to update automatically.
Press this button to display the latest scanner counter readings.
14 User Utility Reference Manual
48
40