Casio celviano ap-700 User Manual page 58

5.
Next, secure the bottom of the back panel
with the six F screws.
B
6.
Adjust the height adjustment screw
provide support so crosspiece
bow downwards when the pedals are
pressed.
• Pressing the pedals without adjusting height
adjustment screw can result in damage to
7
crosspiece . Always make sure you adjust height
D
adjustment screw before operating the pedals.
7
C
C A
F
to
7
D does not
D
7
7.
Place the piano onto the stand.
• In order to ensure you do not get your fingers
pinched between the piano and the stand, grasp the
piano on its sides (not its ends) at the locations
marked with stars ( ) in the illustration.
At least 10cm
9
• At this time the screws on the bottom of the piano
should hook into the cutouts in the stand brackets
Bracket cutout
9
Getting Ready
At least 10cm
9
Back of piano
Stand side panel
8
EN-57
8
.
9