Casio celviano ap-700 User Manual page 34

To record the other track of a song
You can listen to playback of the track you recorded as
you record to the other track.
PREPARATION
• Select the tone and effects (Track 1 only) you want to
use in your recording.
Tone (page EN-10)
Effects (page EN-13)
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the 8METRONOME button. See
"Using the Metronome" on page EN-19 for more
information.
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select "Recorded Part".
R e c o r d e d P a r t
3.
Use the clu and i arrow buttons to
enable (Play) or disable (Mute) of the
recorded track.
4.
Press the bqREC button.
• "Rec Wait..." appears on the display indicating
record standby.
5.
Use the clu and i arrow buttons to select
"MIDI REC".
6.
Use the bqREC button to select a track for
recording.
• L: Track 1
R: Track 2
• "L" and "R" indicate status information about the left
and right tracks as described below.
– If you selected "Play" in step 3, above:
Flashing: Track to be recorded.
Lit: Track to be played back.
– If you selected "Mute" in step 3, above:
Flashing: Track to be recorded.
Unlit: Track to be muted.
7.
Press the bp /k button or play something
on the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
8.
To stop recording, press the boY button.
To configure precount settings
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select "Precount".
3.
Use the clu and i arrow buttons to
enable (On) or disable (Off) the precount.
4.
Press the ckEXIT button to exit the setting
screen.
Recording and Playback
EN-33