Cleaning Tools - Hoover uh70085 Owner's Manual

3. CLEANING TOOLS

Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The cleaner is ready for tool use when handle is in upright position.
The agitator brushroll will not rotate when the cleaner is in the upright position or the if the agitator
brushroll shut off indicator is in the OFF position when the handle is lowered.
Removing Hose Select Proper Tool
When using
3-1 3-2
cleaning tools,
place cleaner
handle in
B
the upright
position.
The agitator
brushroll will
not rotate when
A
the cleaner is
in the upright
position. Also, turn cleaner OFF before
mattresses, clothing, automobile interiors, and carpeted
disconnecting and connecting hose to
stairs.
hose tube (A).
C. Crevice tool may be used in tight spaces, corners and
To use hose, lift hose end (B) as shown.
along edges in such places as dresser drawers, upholstered
furniture, stairs and baseboards.
When you are finished cleaning with the
tools, reposition hose end into tube.
them with any of the above tools.
*Tools may vary per model.
Attach Wand and How to
Tools Clean Tools
To clean the hose and powered hand tool, wipe off dirt with
3-3
a cloth dampened in a mild detergent. Rinse with a damp
cloth. DO NOT submerge powered hand tool in water.
Cleaning tools may be washed in warm water with a
A
detergent. Rinse and air dry before using.
B
Attach tool or wand to the hose (A).
Attach tool to wand (B) by pushing it
firmly onto the wand.
Twist wand or tool slightly to tighten
or loosen the connection.
A. Use Upholstry
B
tool* to clean
upholstered
A
furniture, draperies,
mattresses, clothing,
C
and carpeted stairs.
D
B. Powered hand
tool may be used
for upholstered
furniture, draperies,
7