Nikon D500 User Manual page 62

❚❚ Number of Exposures Remaining
The camera has two memory card slots:
one for XQD cards and the other for SD
cards. When two cards are inserted, the
role played by each is determined by the
options selected for Primary slot
selection and Secondary slot function;
when Secondary slot function is set to
the default value of Overflow (0 96), the
card in the secondary slot will only be
used when the card in the primary slot is
full.
The control panel display shows what
cards are currently inserted (the example
here shows the display when cards are
inserted in both slots). If an error occurs
(for example, if the memory card is full or
the card in the SD slot is locked), the icon
for the affected card will flash (0 355).
The control panel and viewfinder show
the number of photographs that can be
taken at current settings (values over
1000 are rounded down to the nearest
hundred; e.g., values between 2100 and
2199 are shown as 2.1 k).
36
XQD card slot
SD card slot
Control panel
Number of exposures
remaining
Control panel
Viewfinder