The focus selector lock can
be rotated to the locked (L)
position following
selection to prevent the
selected focus point from
changing when the multi
selector is pressed.
A
The Sub-selector
The sub-selector can be used in
place of the multi selector to
select the focus point. Focus
and exposure lock while the
center of the sub-selector is
pressed (0 111, 141). Use the
sub-selector as shown at right;
pressing the sides may not have
the desired effect. Be careful not to put your fingers or fingernails in
your eye when using the sub-selector.
A
Auto-area AF
The focus point for auto-area AF is selected automatically; manual
focus-point selection is not available.
Sub-selector
109