On Repacking; On Mounting On A Rack; On Fan Error; On Ac Adaptor Terminal - Sony LMD-940W Operating Instructions Manual

On Repacking

Do not throw away the carton and packing materials.
They make an ideal container which to transport the
unit.

On Mounting on a Rack

Leave 1U space empty above and below the monitor to
ensure adequate air circulation or install a fan to
maintain the monitor's performance.
If you have any questions about this unit, contact your
authorized Sony dealer.

On Fan Error

The fan for cooling the unit is built in. When the fan
stops and the 1 (standby) switch indicator on the front
panel flashes in green and amber for fan error indication,
turn off the power and contact an authorized Sony
dealer.

On AC Adaptor Terminal

The AC adaptor terminal of this unit (the connector for
AC adaptors) is a consumable part.
The unit may not operate properly if the pins of the AC
adaptor terminal are bent or deformed by shock or
vibrations, or if they become corroded due to prolonged
outdoor use.
Periodic inspections are recommended to keep the unit
working properly and to prolong its usable lifetime.
Contact your dealer or a Sony service representative for
more information about inspections.

Features

The LMD-940W (9 type) is a multiple format LCD
monitor for broadcast or business use featuring a precise
image and high performance. It supports both digital or
analog main broadcast signal and HDMI
also equipped with functions to adjust for various
objects or use.
1)
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
High brightness LCD panel
Because of precise image, wide viewing angle
technology and high speed response, real color image
can be reproduced. Use the light intercepting hood,
connector protector and carrying handle (optional Sony
VF-510 Monitor ENG Kit) for outdoor use.
Multi-format
The monitor supports video, HDMI, SDI (3G/HD/SD)
signals and NTSC/PAL color systems.
For more information, see "Available signal formats"
on page 29.
External remote function
The input signal is selected or various items are adjusted
by use of the serial (Ethernet) remote function. Up to 32
monitors and control units (max. 4) can be connected by
the Ethernet (10BASE-T/100BASE-TX) connection
and controlled remotely on the network. You can
control individual monitors or monitor groups simply by
entering the monitor ID or group ID number. You can
also execute the same operation on all connected
monitors, or put all connected monitors into the same
setup and adjustment state.
For more information, see SERIAL REMOTE of
REMOTE menu on page 25.
Refer to the Operation Manual of the BKM-15R Monitor
Control Unit.
Rack mount monitors
Using the optional MB-531 Mounting Bracket, up to
two monitors may be mounted on the EIA-standard 19-
inch rack. A height of 4U space-saving design allows
more equipment to be installed in tight space, such as an
outdoor broadcasting van.
Monitor stand
You can set the monitor display in 15° by using the
stand.
1)
input. It is
7
Features