Description Of Controls; Description Of Controls - Zenith Z44SZ80 Service Manual

Controls
Controls
- This is a simplified representation of a front panel.
- Here shown may be somewhat different from your TV.
POWER
POWER Button
MENU Button
Function Status Indicators
Function Status Indicators
- Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the
operating status of the DLP projection TV.
Operation Indicator
Lamp Indicator
Temperature Indicator

DESCRIPTION OF CONTROLS

Front Panel Controls
Front Panel Controls
MENU ENTER VOL
VOLUME (
Buttons
ENTER Button
Off Power cord is not connected.
Red Power Cord is connected, TV is in standby mode.
Green TV turns on.
Orange (blinking) Preparing operation in standby mode.
Orange Projection lamp is reaching the end of its life and needs to
be replaced with a new lamp. Contact your service center.
Red (blinking) There is a problem with the lamp or around it. Contact an
authorized service center.
Green (blinking) The lamp cover is not closed.
Orange The projection TV is overheating. Check the blocked vents of
the projection TV.
Red The projection TV shut down due to overheating.
Red (blinking) The projection TV shut down, check the cooling fan. Contact
your service center.
CH
F F , G G ) Operation Indicator/
Lamp Indicator/
CHANNEL ( E E , D D )
Temperature Indicator
Buttons
- 4 -