Front Panel Controls / Side Panel Inputs - Zenith R56W28 Operating Manual

Front Panel Controls and Inputs
Use the front panel to operate the TV's basic features and use the front source
inputs to make temporary connections - - to use a camcorder for example
1
To access the menus, press the MENU but-
ton on the panel. Also use MENU as the
SELECT key when required.
2
Use the VOLUME Left/Right buttons as
the LEFT/RIGHT arrow buttons on your
remote.
3
Use the CHANNEL Up/Down buttons as
the UP/DOWN arrow buttons on your
remote.
4
Use the EXIT button to return to normal
TV viewing.
5
Use the SOURCE button to cycle through
all sources.
Refer to the menu pages for using the
on-screen menus.
The CHANNEL and VOLUME buttons work
just as they do on your remote control.
Auto Demo is activated by pressing the
POWER button on the front panel with the
TV off and holding down on the button. To
turn Auto Demo off, press the POWER but-
ton once.
There are four jacks on the Front panel of your
Entertainment Machine that make connecting
Audio/Video equipment like video games and
camcorders very simple.
The jacks are identical to those found on the
back of your Entertainment Machine. Which
means that any equipment that connects to
those types of jacks in the rear jack pack, can
also be connected on the Front panel.
To use the Front jacks as the signal source, use
the SOURCE button on your remote. To change
the name of the Front Video source Input 5, see
page 31.
206-3805
s el ect
1 3
2
4/5
S-VIDEO VIDEO L-AUDIO-R
(MONO)
INPUT 5
P A G E 2 1