Factory Default Setting - Zoom g9.2tt Service Manual

42. Factory default setting

Set the knobs and switch as follows:
OUTPUT VOLUME
All EFFECT VOLUME
All ENERGIZER VOLUME
TUBE VOLUME OF ACCELERATOR
SOLID STATE VOLUME OF ACCELERATOR
GAIN SW (both OUTPUT and EXT LOOP)
EX PEDAL (both 1 and 2)
Z PEDAL
Lock arm
POWER
If the unit was operated, carry out the All Initialize function for certain before shipment.
-16 -
Center
Turn anticlockwise till limit
Turn anticlockwise till limit
Adjust to 5 (center)
Adjust to 5 (center)
-10 dBm
MAX(contact with the gum)
Move to left till limit
raise
OFF