Operating Controls And Features - Toyotomi KS-27A Operation And Maintenance Instructions

OPERATING CONTROLS
7 Heat Chamber Handle
6 Manual Shutt-off Lever
5 Fuel Gauge
1. Heat Chamber:
2. Safety Guard:
3. Wick Adjuster Knob:
4. Fuel Tank Cap:
5. Fuel Gauge:
6. Manual Shutoff:
7. Heat Chamber Handle: Used to check and insure proper seating of the heat chamber after ignition.
AND FEATURES
Permits adjustment of heat output without increasing unwanted combustion
materials or reducing combustion efficiency. This feature increases comfort and
convenience while maximizing fuel savings.
Extensive grillework covers the hot surfaces of the heater, greatly reducing the
possibility of accidental contact burns.
Used to raise and lower wick for heat output adjustment. To extinguish flame
turn knob counterclockwise.
Covers filling port of fuel tank.
NOTE: Wipe away any spilled kerosene from tank after filling.
Indicates fuel level in tank.
NOTE: Never fill beyond black line.
Used to rapidly retract wick and extinguish flame.
NOTE: To avoid odor and smoke, do not use routinely to turn heater off. This
manual shutoff is not effective when gasoline, gasoline-contaminated
kerosene, or other highly flammable fuels are used in the heater.
lmproper seating of the heat chamber will cause erratic flame and smoke.
K S -2
7 A
MADE IN JAPAN
4
2. Safety Guard
1. Heat Chamber
3. Wick Adjuster Knob
4. Fuel Tank Cap