Others; Test Pattern - NEC XL-6500 User Manual

Others

Test Patterns
This projector will generate a selection of test signals.
Seven kinds of internal test patterns can be selected from the Test
Pattern menu.
To display the Test Pattern menu, proceed as follows:
1. Press the TEST button on the remote control.
• The Test Pattern menu will be displayed.
• When END is pressed, the Test Pattern menu will disappear.
2 User the CURSOR or
you wish to use and press ENTER.
• The selected test pattern will be displayed.
3 To return to the original screen, press TEST and then press END.
• When the TEST button is pressed, the Test Pattern menu will
be displayed and when END is pressed, the screen will be
changed to the source screen.
• The projector will return to the original source screen by
pressing END only when no menu or no adjustment screen is
displayed.

TEST PATTERN

CROSS HATCH
CONTRAST CHECKER BOARD
BLACK FLAT FIELD
button to highlight the test pattern
FLAT FIELD
SMALL CHECKER BOARD
GRAY BARS
RAMP
75
3.OPERATION
T e s t P a t t e r n
O f f
F l a t F i e l d
R a m p
C o n t r a s t C h e c k e r b o a r d
C r o s s H a t c h
G r a y B a r s
S m a l l C h e c k e r b o a r d
B l a c k F l a t F i e l d