NEC XL-6500 User Manual page 56

Multisync hivid 6500 series large screen multisync projection system
Table of Contents

Advertisement

3.OPERATION
7 Enter a new passcode using the "1" through "10" buttons.
1) Each time you press the INPUT button, an asterisk will appear
next to the "New Passcode?" message.
2) Once you have finished entering the four digit new passcode,
press ENTER.
NOTE: If you have made an error, press the NORMAL button
to delete the asterisk "*". Then re-enter the correct passcode.
To delete all the entered digits, hold down the CTL button
thenpress the NORMAL button.
3) If the passcode has been entered correctly, the "Confirm New
Passcode?" menu will be displayed.
NOTE: If the passcode is not entered correctly, the "Warning
Different Passcode!!" message will be displayed. You are
required to enter the new passcode correctly.
8 Enter the new passcode again using the "1" through "10" buttons.
1) Each time you press the INPUT button, an asterisk will appear
under the "Confirm New Passcode?" message.
2) Once you have finished entering the four digit new passcode,
press ENTER.
NOTE: If you have made an error, press the NORMAL button
to delete the asterisk "*". Then re-enter the correct passcode.
To delete all the entered digits, hold down the CTL button
then press the NORMAL button.
3) If the entered passcode is correct, the "Change Passcode
Complete!!" message is displayed.
NOTE: If the passcode is not entered correctly, the "Warning
Different Passcode!!" message is displayed. You will be
required to enter the new passcode correctly.
The passcode has been changed to another.
56
P a s s c o d e
P A S S C O D E
S E T T I N G
P a s s c o d e
S e t t i n g
E N A B L E
D I S A B L E
C o n f i r m
P a s s c o d e
[
]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-6500gMultisync 6500Hivid 6500

Table of Contents