NEC XL-6500 User Manual page 54

Multisync hivid 6500 series large screen multisync projection system
Table of Contents

Advertisement

3.OPERATION
6 Enter the new passcode again.
1) Each time you press the INPUT button, an asterisk will appear
next to the "Confirm New Passcode?" message.
2) Once you have finished entering the new four digit passcode,
press ENTER.
NOTE: If you have made an error, press the NORMAL button
to delete the asterisk "*". Then re-enter the correct passcode.
To delete all the entered digits, hold down the CTL button
then press the NORMAL button.
3) If the entered passcode is correct, the "Change Passcode
Complete!!" message will be displayed.
NOTE: If the passcode is not correct, the "Warning Different
Passcode!!"message will be displayed. You are required to
enter the new passcode correctly.
The new passcode has been registered.
54
P a s s c o d e
P A S S C O D E
S E T T I N G
P a s s c o d e
S e t t i n g
E N A B L E
D I S A B L E
C o n f i r m
P a s s c o d e
[
]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-6500gMultisync 6500Hivid 6500

Table of Contents