Wiring Diagram - NEC VT650 User Manual

Nec user manual lcd projector vt650
Hide thumbs Also See for VT650:
Table of Contents

Advertisement

Wiring Diagram

Monitor
VCR, DVD Player or
LaserDisc Player
To video, S-video, and audio
inputs on the projector.
Document Camera
NOTE: When using with a notebook PC, be sure to connect be-
tween the projector and the notebook PC before turning on the
power to the notebook PC. In most cases signal cannot be output
from RGB output unless the notebook PC is turned on after con-
necting with the projector.
NOTE:
* If the screen goes blank while using your remote control, it
may be the result of the computer's screen-saver or power
management software.
* If you accidentally hit the POWER OFF button on the remote
control, wait 60 seconds and then press the POWER ON but-
ton again to resume.
NOTE: If using video, S-video, or audio cables, the cables should
be 3 m (9.8 feet) or shorter.
To connect SCART output (RGB)
Before connections: An exclusive SCART adapter (ADP-SC1)
and a commercially available SCART cable are required for this
connection.
NOTE: Audio signal is not available for this connection.
RGB INPUT
AUDIO
IN
RGB OUTPUT
OUT
PC CONTROL
S-VIDEO
VIDEO
OUT
IN
Signal cable (supplied)
To mini D-Sub 15-pin connector on
the projector. It is recommended
that you use a commercially
available distribution amplifier if
connecting a signal cable longer
than the supplied cable.
Component video cable RCA 3 (not supplied) and
Optional 15-Pin-to-RCA (female)
Video equipment such as DVD player
Commercially available SCART cable
1. Turn off the power to the projector and your video equipment.
2. Use the NEC ADP-SC1 SCART adapter and a commercially
available SCART cable to connect the RGB input of your
projector and a SCART output (RGB) of your video equip-
ment.
3. Turn on the power to the projector and your video equip-
ment.
4. Use the RGB button on the remote control to select the RGB
input.
5. Press the MENU button on the remote control to display the
menu.
6. From the Advanced menu, select [Projector Options]
[Setup]
[Signal Select RGB]
SCART is a standard European audio-visual connector for TVs,
VCRs and DVD players. It is also referred to as Euro-connector.
NOTE: The ADP-SC1 SCART adapter is obtainable from your
NEC dealer in Europe.
Contact your NEC dealer in Europe for more information.
E–19
Macintosh or Compatibles
(Desktop type or notebook type)
IBM VGA or Compatibles
(Desktop type or notebook type)
DVD Player (with component output)
3 cable (ADP-CV1)
Projector
ADP-SC1
Female
[Scart].

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt650j

Table of Contents