Switching Operation Mode Between Computer And Projector - NEC VT650 User Manual

Switching Operation Mode between Computer and Projector

The SELECT, ENTER, and CANCEL buttons shown on the drawing work as a computer mouse in the Computer mode.
In the Computer mode the PJ button is not lit.
• When any one of the POWER ON, OFF, MENU, HELP, or MAGNIFY button is pressed, the PJ button lights red to indicate that
you are in the Projector mode, which allows the projector menu operation using the SELECT, ENTER or CANCEL buttons.
• If no buttons are pressed within 10 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To
enable the projector menu operation again, press the PJ button to light red.
• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode
(not lit).
[Computer mode]
OFF ON
POWER
VIDEO S-VIDEO RGB AUTO ADJ.
SELECT
PJ
PICTURE ASPECT
HELP FREEZE PIC-MUTE
MAGNIFY
VOLUME
During Computer mode:
During Computer mode by pressing the ENTER button for 1.5 seconds or more then releasing, the drag mode is set and the drag
operation can be performed simply by pressing the SELECT (
ENTER (left click) button again or press the CANCEL (right click) button.
Note on Operating Your PC with the Remote Control
If no button operation is made for 60 seconds or more, the SELECT (
This is not a malfunction, rather it is a feature used to prolong battery power.
To cancel this feature, press the CANCEL button.
Works as a mouse for your
computer.
Works as a right-click but-
ton for your computer.
Not Iit
Works as a left-click button
for your computer.
[Projector mode]
OFF ON
POWER
VIDEO S-VIDEO RGB AUTO ADJ.
SELECT
PJ
PICTURE ASPECT
HELP FREEZE PIC-MUTE
MAGNIFY
VOLUME
, , , ) / (mouse) button.To cancel the drag mode,press the
, , , ) /(mouse) button operations will cease to operate.
E–15
Works as the Select button
on the projector.
Works as the Cancel button
on the projector.
Lit red
Works as the Enter button
on the projector.