Connecting The Supplied Power Cable - NEC NP4001/NP4000 User Manual

2. Installation and Connections

Connecting the Supplied Power Cable

Refer to the following guidelines to connect the power supply to the projector.
1. Locate the projector correctly. See
2. Ensure Main Power switch is in the off position (O).
3. Connect power cable to mains outlet.
4. Connect power cable to power inlet (AC IN) on the projector, see
Panel Features on page 10.
Note:
Make sure that the prongs are fully inserted into both the AC IN and the wall
outlet.
Note:
Ensure that the cables do not create a trip hazard.
Selecting a Location on page 18.
36
Terminal