Connecting Your Dvd Player With Component Output - NEC NP4001/NP4000 User Manual

2. Installation and Connections

Connecting Your DVD Player with Component Output

To connect a DVD Player to the projector, refer to the following guide.
1. Connect the DVD Player to the projector as shown below before turning on the
Player or the projector.
2. Turn on the projector and select Component from the source menu before turn-
ing on the DVD Player (see
3. Turn on the DVD Player.
Note:
Refer to your DVD player's owner's manual for more information about your DVD
player's video output requirements.
Selecting a Source on page 39).
34