NEC NP4001/NP4000 User Manual page 101

DynamicBlack
DynamicBlack enables you to improve the black level of the projector.
Remote Sensor
Set the operating range for the wireless remote control.
Select from the following:
Front/Back
Front
Back
LAN Settings
See LAN Settings on page 91.
Standby Mode
There are two standby modes available: Normal and Power-Saving. Power-Saving
mode allows you to put the projector in the standby condition to consume less power
than Normal.
Note:
Be sure to connect the projector and computer while the projector is in standby
mode and before turning on the computer.
5. Using On-Screen Display
89