NEC NP41G User Manual page 20

WARNING
* Installing your projector on the ceiling must be done
by a qualified technician. Contact your NEC dealer
for more information.
* Do not attempt to install the projector yourself.
• Only use your projector on a solid, level surface. If
the projector falls to the ground, you can be injured
and the projector severely damaged.
• Do not use the projector where temperatures vary
greatly. The projector must be used at temperatures
between 41˚F (5˚C) and 104˚F (40˚C). ([ECO] mode
selected automatically at 95°F to 104°F/35°C to 40°C.
Note that [ECO] mode will be selected automatically
at 86°F to 104°F/30°C to 40°C when used in [HIGH
ALTITUDE].)
• Do not expose the projector to moisture, dust, or
smoke. This will harm the screen image.
• Ensure that you have adequate ventilation around
your projector so heat can dissipate. Do not cover
the vents on the side or the front of the projector.
. Installaton and Connectons
Reflectng the Image
Using a mirror to reflect your projector's image en-
ables you to enjoy a much larger image when a
smaller space is required. Contact your NEC dealer if
you need a mirror system. If you're using a mirror sys-
tem and your image is inverted, use the MENU and
SELECT buttons on your projector cabinet or your
remote control to correct the orientation. (→ page 62)