Bosch GWS Professional 18 V-LI Original Instructions Manual page 18

OBJ_BUCH-1102-005.book Page 19 Thursday, January 10, 2013 11:03 AM
3 On/Off switch
4 Allen key
5 Battery pack*
6 Battery unlocking button*
7 Auxiliary handle (insulated gripping surface)
8 Grinder spindle
9 Locking screw for protection guard
10 Protection guard for grinding
11 Mounting flange with O-ring
12 Grinding wheel*
13 Clamping nut
14 Quick-clamping nut
15 Carbide grinding head*
16 Protection guard for cutting*
Technical Data
Angle Grinder
Article number
Rated voltage
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Weight according to EPTA-Procedure 01/2003
* dependent of the battery pack being used
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Surface grinding: a =6.0 m/s , K=1.5 m/s
h
2
Disk sanding: a =2.5 m/s , K=1.5 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Bosch Power Tools
17 Cutting disc*
18 Hand guard*
19 Rubber sanding plate*
20 Sanding sheet*
21 Round nut*
22 Cup brush*
23 Button for charge-control indicator*
24 Battery charge-control indicator*
25 Handle (insulated gripping surface)
26 Cutting guide with dust extraction protection guard *
27 Diamond cutting disc*
*Accessories shown or described are not part of the standard de-
*
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
2
,
2
. Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 04.12.2012
Assembly
Battery Charging
 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
GWS 18 V-LI
3 601 J3A 300
V= 18
-1
min 10000
mm 115
M 14
mm 22
kg 2.1/2.3*
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
1 609 92A 01F | (10.1.13)
English | 19
GWS 18-125 V-LI
3 601 J3A 301
18
10000
125
M 14
22
2.1/2.3*