Selecting Tracks/Files; Scan Play All Tracks; Repeating The Same Track; Playing All Tracks At Random - Blaupunkt TOKYO 110 Operating And Installation Instructions

OPERATION
• "SD(HC)": Inserted memory card
• "USB": Connected USB data carrier
• "AUX": Connected external audio
source
Notes:
• The respective audio source can be
selected only if a corresponding
device is connected.
• If the car sound system first has to
read the data of a connected device
data carrier before the playback, the
display shows "READING". The
duration of the reading depends on
the data volume and design of the
device or data carrier. If the device
or data carrier is defective or the
transferred data cannot be played
back, a corresponding message
appears on the display (e. g. "USB
ERROR").

SELECTING TRACKS/FILES

Press the
(5) to move to the previous or the next
track/file. The track/file number is
shown on the display.
Hold the
(5) to fast reverse or fast forward. Disc
play starts at the point you release the
button.
PLAY/PAUSE
Press the
playback. Press it again to resume
playback.
SCAN PLAY ALL TRACKS/FILES
Press the SCN button (16) to play the
first seconds of each track/file. Press
again to stop intro play and listen to the
track/file.
REPEATING THE SAME TRACK/FILE
Press the
continuously repeat the same track/file.
Press it again to repeat all the
tracks/files.
PLAYING ALL TRACKS IN RANDOM
Press the RDM button (14) to play all
tracks/files in random order. Press it
again to cancel the random function.
SELECT DIRECTORY UP/DOWN
Press the DIR
button (12) to select the previous or
next directory. If the MP3/WMA disc
does not contain any directory, the
function DIR
(12) is not available.
11
button (9) or
button (9) or
button (17) to pause
RPT button
button (13) or DIR
-
button (13) or
- DIR+
button
button
(15) to
+
button