Table of Contents
Advertisement
OS/2 Warp Server or
LAN Server v4.0
This section describes how to add your Silentwriter to a
network using OS/2 and Warp Server or LAN Server
version 4.0. You need to complete the following steps.
1.
Install software. NEC provides software to simplify
the configuration process.
2.
Identify the printer. Create files to define and
activate the printer.
3.
Print documents.
Before you begin you will need to know the last ten
digits of the MAC address for the printer. This
information is included on the configuration page. See
"Print a Configuration Page" on page 2-13.
4–36
1765 Network Printer Configuration Guide
Install Software
Follow these steps to install the NEC printing utilities
for OS/2. These directions assume you are at the OS/2
window prompt.
1.
Insert the NEC diskette containing the OS/2
printing utilities in the appropriate drive. This
example uses drive a: and assumes that the hard
drive is drive c:.
2.
Create a directory on the hard drive called NECPR
and copy the NEC LAN Manager utility to that
directory.
copy a:\OS2\*.* c:\NECPR
The following files will be copied to the NECPR
directory
ADDPORT.CMD
DELPORT.CMD
PORTCHG.EXE
REMBEU.EXE
REMPRT3.EXE
REMSTAT3.EXE
LANMAN3.TXT
LMSETUP.TXT
3.
Move to the NECPR directory.
cd c:\NECPR
Advertisement
Table of Contents
