Lan Manager V2.2; Install Software - NEC Silentwriter 1765 Configuration Manual

LAN Manager v2.2

This section describes how to add your Silentwriter to a
network using OS/2 and LAN Manager version 2.2. You
need to complete the following steps.
1. Install software. NEC provides software to simplify
the configuration process.
2. Identify the printer. Create files to define and
activate the printer.
3. Print documents.
Before you begin you will need to know the last ten
digits of the MAC address for the printer. This
information is included on the configuration page. See
"Print a Configuration Page" on page 2-13.
4–34 1765 Network Printer Configuration Guide

Install Software

Follow these steps to install the NEC printing utilities
for OS/2.
1. Insert the NEC diskette containing the OS/2
printing utilities in the appropriate drive. This
example uses drive a: and assumes that the hard
drive is drive c:.
2. Create a directory on the hard drive called NECPR
and copy the NEC LAN Manager utility to that
directory.
copy a:\OS2\*.* c:\NECPR
The following files will be copied to the NECPR
directory
ADDPORT.CMD
DELPORT.CMD
PORTCHG.EXE
REMBEU.EXE
REMPRT3.EXE
REMSTAT3.EXE
LANMAN3.TXT
LMSETUP.TXT
3. Move to the NECPR directory.
cd c:\NECPR