Table of Contents
Advertisement
Installing NEC 1765 Software
for TCP/IP
Precautions
•
Sometimes NEC 1765 software requires additional
memory to run. You can free more memory by
closing unused software applications.
•
Only the system administrator should install and
use NEC 1765 Administration software. Network
users can use NEC 1765 Client software to manage
print jobs across the network.
•
Install NEC 1765 Client software on each client
computer.
3–10
1765 Network Printer Configuration Guide
To install NEC 1765 software on Windows systems you
need
•
a computer with an 80386 SX processor operating at
16 mhz or above
•
for Windows 3.1x, at least 8 megabytes of RAM and
preferably more
•
for Windows 95, at least 8 megabytes of RAM and
preferably more
•
a hard disk with at least 2 megabytes available
note:
Both NEC 1765 Administration software and
NEC 1765 Client software are easier to use with a
mouse. NEC 1765 software also supports hot key
combinations. Underlined letters indicate a hot key.
Press Alt and the underlined letter to use a hot key
combination. Press Tab to move from field to field.
Press the Up and Down arrows to scroll.
Advertisement
Table of Contents
