Table of Contents
Advertisement
Installing NEC 1765 Software
for NetWare
Precautions
•
Do not run NEC 1765 Administration software and
NEC 1765 Client software simultaneously on the
same computer.
•
If the NEC 1765 software requires additional
memory to run, try closing unused software
applications to free more memory.
•
Only the system administrator should install and
use NEC 1765 Administration software. Network
users can use NEC 1765 Client software to manage
print jobs across the network.
•
Install NEC 1765 Client software on each client
computer. See "Installing NEC 1765 Client Software
for NetWare in Windows 3.1x" and "Installing
NEC 1765 Client Software for NetWare in Windows
95" on page 3-8.
3–4
1765 Network Printer Configuration Guide
To install NEC 1765 software on Windows systems you
need
•
a computer with an 80386 SX processor operating at
16 mhz or above
•
for Windows 3.1x, at least 8 megabytes of RAM and
preferably more
•
for Windows 95, at least 8 megabytes of RAM and
preferably more
•
a hard disk with at least 2 megabytes available
note:
Both NEC 1765 Administration software and
NEC 1765 Client software are easier to use with a
mouse. NEC 1765 software also supports hot key
combinations. Underlined letters indicate a hot key.
Press Alt and the underlined letter to use a hot key
combination. Press Tab to move from field to field.
Press the Up and Down arrows to scroll.
Advertisement
Table of Contents
