Correcting The Brightness (D-Range Setting) - Pentax Optio WG-1 User Manual Manual

OptioWG1_eng.book Page 134 Friday, March 11, 2011 4:10 PM

Correcting the Brightness (D-Range Setting)

Expands the dynamic range and prevents bright and dark areas from
occurring. [Highlight Correction] adjusts the bright areas when the image
is too bright and [Shadow Correction] adjusts the dark areas when the
image is too dark.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [D-Range
3
Setting].
3
Press the four-way controller (5).
The [D-Range Setting] screen appears.
4
Use the four-way controller
(23) to select [Highlight
Correction] or [Shadow
Correction].
5
Use the four-way controller (45) to select O or P.
6
Press the 3 button twice.
The camera returns to capture status.
The D-Range Setting icon appears on
the display.
When [Highlight Correction] is set
P
to O
When [Shadow Correction] is set to
Q
O
When [Highlight Correction] and
O
[Shadow Correction] are set to O
• When the Sensitivity is set to 80 or 100 and Highlight Correction is set
to O (On), the setting changes to 160. The setting returns when
Highlight Correction is set to P (Off).
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button (p.139).
134
D-Range Setting
Highlight Correction
Shadow Correction
MENU
P
3 8