Pentax Optio WG-1 User Manual Manual page 307

OptioWG1_eng.book Page 307 Friday, March 11, 2011 4:10 PM
2
Use the four-way controller (23) to select [GPS].
3
Press the four-way controller (5).
[GPS] screen appears.
4
Use the four-way controller (23)
to select [Logging].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23)
to select the interval for
positioning.
Choose from [Off], [15sec.], [30sec.], or
[1min.]
7
Press the 4 button.
The setting is saved.
• [Logging] can be set only when [GPS Setting] is set to O (On).
• The logs are saved in the SD Memory Card only.
• Up to 999 log files can be saved or to the capacity of the SD Memory
Card.
• A new log file is created in the following situations:
• When the date changes
• When the capacity of a log file is full
• After changing an SD Memory Card
• When changing the display format of the date
• When the battery level icon is red, logging stops.
• When setting the interval in [Logging], the camera performs
positioning regularly even if it is turned off, which reduces the battery
life.
• Before changing the battery, set [Logging] to [Off].
This part applies only to Optio WG-1 GPS camera
GPS
GPS Setting
Logging Off
Off
Auto Time Synch.
MENU
GPS
GPS Setting
Logging
Off
15sec.
30sec.
Auto Time Synch.
1min.
MENU Cancel OK OK
9
307