Setting The Interval Shooting - Pentax Optio WG-1 User Manual Manual

OptioWG1_eng.book Page 136 Friday, March 11, 2011 4:10 PM

Setting the Interval Shooting

In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
Interval 10 sec. – 99 min.
Number 2 shots – number of
3
of Shots recordable images
Start Delay 0 min. – 24 hours
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller
(23) to select [Interval
Shoot].
3
Press the four-way controller (5).
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
1 Press the four-way controller
(5).
2 Use the four-way controller (23)
to set the minutes, then press the
four-way controller (5).
3 Use the four-way controller (23)
to set the seconds, then press the four-way controller (5).
The setting is saved, and the frame returns to [Interval].
136
Set the camera to take pictures at intervals. The
intervals can be set in increments of one second
from ten seconds to 4 minutes, or in 1 minute
increments from 4 to 99 minutes. You cannot set
the camera to take interval shots for less than ten
seconds.
You can set this to up to 1000 shots. However, it
cannot exceed the number of recordable images.
You can set 1 minute increments for the first 59
minutes and 1 hour increments from there. If the
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU
Interval Shoot
Interval
Number of Shots
Start Delay
MENU
Rec. Mode 3/4
Exit
0 10
min. sec.
2
0 0
hr. min.