Belkin F5D7230-4 User Manual page 82

Hide thumbs Also See for F5D7230-4:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Using the Web-Based Advanced User Interface
Using the Web-Based Advanced User Interface
Changing System Settings
The "System Settings" page is where you can enter a new
administrator password, set the time zone, enable remote
management, and turn on and off the NAT function of the Router.
Setting or Changing the Administrator Password
The Router ships with NO password entered. If you wish to add a password
for greater security, you can set a password here. Write down your password
and keep it in a safe place, as you will need it if you need to log into the
Router in the future. It is also recommended that you set a password if you
plan to use the remote management feature of your Router.
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you
can be logged into the Router's Web-Based Advanced User Interface.
The timer starts when there has been no activity. For example, you
have made some changes in the advanced setup interface, then left
your computer alone without clicking "Logout". Assuming the time-
out is set to 10 minutes, then 10 minutes after you leave, the login
session will expire. You will have to log into the Router again to make
any more changes. The login time-out option is for security purposes
and the default is set to 10 minutes.
Note:
Only one computer can be logged into the Router's Web-Based
Advanced User Interface at one time.
Setting the Time and Time Zone
The Router keeps time by connecting to a Simple Network Time
Protocol (SNTP) server. This allows the Router to synchronize the
system clock to the global Internet. The synchronized clock in the
Router is used to record the security log and control client filtering.
Select the time zone that you reside in. If you reside in an area that
observes daylight saving, then place a check mark in the box next
to "Automatically Adjust Daylight Saving". The system clock may
not update immediately. Allow at least 15 minutes for the Router to
contact the time servers on the Internet and get a response. You
cannot set the clock yourself.
80
80

Advertisement

Table of Contents
loading

Table of Contents