Belkin F5D7230-4 User Manual page 33

Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Static IP
A static IP address connection type is less common than other connection
types. If your ISP uses static IP addressing, you will need your IP address,
subnet mask, and ISP gateway address. This information is available from
your ISP or on the paperwork that your ISP left with you. Type in your
information, then click "Apply Changes"
the "Internet Status" indicator will read "connection OK" if your Router is
set up properly.
(1)
(2)
(3)
1. IP Address
Provided by your ISP. Enter your IP address here.
2. Subnet Mask
Provided by your ISP. Enter your subnet mask here.
3. ISP Gateway Address
Provided by your ISP. Enter the ISP gateway address here.
(5)
. After you apply the changes,
31 31
1
2
3
4
5
6
7
8
9
10