Belkin F5D7230-4 User Manual page 25

Alternate Setup Method
1.5
Turn your cable or DSL modem on by reconnecting the power
supply to the modem.
Mac or PC computer that was originally connected to the
To power adapter
Note: Your Router may have ports in different locations than
depicted in the illustration above.
1.6
Before plugging the power cord into the Router, plug the cord
into the wall, then plug the cord into the Router's power jack.
1.7
Verify that your modem is connected to the Router by checking
the lights on the front of the Router. The green light labeled
"Modem" should be ON if your modem is connected correctly to
the Router. If it is not, recheck your connections.
1.8
Verify that your computer is connected properly to the Router by
checking the lights labeled "1-4". The light that corresponds to
the numbered port connected to your computer should be ON if
your computer is connected properly. If it is not, recheck your
connections.
cable or DSL modem
23 23
Network cable (to
computer)
Existing networking cable
(came with modem)
1
2
3
4
5
6
7
8
9
10