Raymarine i50 Installation And Operation Instructions Manual page 37

Setting dealer calibration options - i50 Tridata
During normal operation:
1. Press and hold the Depth and Speed buttons simultaneously
for approximately 14 seconds to display the dealer calibration
entry page.
60 5
55
10
50 14
45 15
40 20
35 25
30
2. Press the Trip and Reset buttons simultaneously to display the
user calibration access page.
Trip
3. Press the Depth button to display the speed select page.
De pth
4. Use the Trip or Reset buttons to switch the speed data source
on and off.
5. Press the depth button to display the speed response page.
De pth
6. Use the Trip or Reset buttons to set the required speed
response value.
7. Press the Depth button to display the depth response page.
De pth
8. Use the Trip or Reset buttons to set the required depth response
value.
9. Press the Depth button to display the boat show mode page.
De pth
10. Use the Trip or Reset buttons to switch boat show mode on
and off.
11. Press the Depth button to display the factory reset page.
De pth
12. Use the Trip or Reset buttons to reset the units settings to
factory default values
13. To exit the Dealer calibration pages at any time, press and hold
the Depth and Speed buttons simultaneously for approximately
2 seconds.
Getting started
Re s e t
D12481-1
D12482-1
D12483-1
D12484-1
D12485-1
D12486-1
D12487-1
37