Table of Contents
Advertisement
RECHARGING THE HEADSET
To recharge the headset, place it into the charge cradle 1 in the base
unit. During charging, the charge indicator 9 on the base unit will
flash amber.
When the headset is fully charged, the charge indicator on the base
unit will stop flashing and remain illuminated.
A completely depleted headset requires a minimum charge time of
1 hour before use, and 3 hours to fully charge.
REPLACING THE HEADSET BATTERY
Should it be necessary to replace the headset battery at anytime, please refer
to the diagrams below.
6
OPTIONS
SETTING UP THE OPTIONAL HANDSET LIFTER
Use the directions provided with the handset lifter to set it up.
MAKING A CALL USING
THE HANDSET LIFTER
Press the talk button on the headset. The
handset lifter will raise the telephone
handset off hook. You will then hear a dial
tone in your headset and can proceed to
make a call as normal.
When you finish your call, press the talk
button. The handset lifter then lowers the
handset to end the call.
RECEIVING A CALL USING THE HANDSET
LIFTER
When a new call is received, the telephone rings as normal. In addition, a ring alert
of three short beeps will be heard in your headset and the headset talk indicator light
will flash.
To answer the call, press the talk button on the headset. The handset lifter will then
raise the telephone handset off hook and you will be able to talk to the caller.
When you have finished your call, press the talk button on your headset. The handset
lifter then lowers the handset to end the call.
NOTE
The ring alert feature (audio and visual) is only active when the handset lifter
is connected.
7
Advertisement
Table of Contents
