U-Line 3018CLR User Manual page 69

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
To access Relay Toggle
1. Use Down to select "Relay Toggle".
2. Press Select .
3. Use Up and Down
DC output.
4. Press Select to toggle.
To exit the Relay Toggle menu use Up
to Menu" and press Select
Input Status
Up
Down
Input status displays the current state of each available
input as well as the current USB connection state.
ID Description
Door Door Switch
IN2 Input 2 - Not Used
Test Input Factory Test Input
USB USB Connection State
NOTE: USB status shows current connection state. In
order to make a successful connection USB connection
type must be properly set in "USB Port" under the service
menu.
To access Input Status
1. Use Down to select "Input Status".
2. Press Select .
to scroll through each relay or
to select "Return
to confirm.
Select
RETURN TO MENU
INPUT STATUS
DOOR OPEN
IN2 OPEN
States
Open - Closed
Open
Open
Flash - Com Port
3. Use Up and Down
information.
To exit the Input Status menu use Up
to Menu" and press Select
Outputs
Up
Down
Outputs is used to monitor the state of DC outputs.
ID Description
Evap Fan Evaporator Fan
Condenser Fan Condenser Fan
Light Interior Lighting
To access Outputs
1. Use Down to select "Outputs".
2. Press Select
3. Use Up and Down
information.
To exit the Outputs Status menu use Up
"Return to Menu" and press Select
Offsets
Up
Can be displayed in Celsius
Down
u-line.com
to scroll through available
to select "Return
to confirm.
Select
RETURN TO MENU
OUTPUTS
EVAP FAN=0%
CONDENSER FAN=0%
States
0 - 100%
0 - 100%
Off - Low - Med - High
to scroll through available
to select
to confirm.
Select
RETURN TO MENU
OFFSETS
ZONE = 1°F
EVAP = 1°F
Service Mode 4