Ice - U-Line 3018CLR User Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Ice

ICE CUBE THICKNESS ADJUSTMENT
NOTICE
Ice thickness adjustment should only be made
one increment at a time. Allow ice maker
production to stabilize for 24 hours before
rechecking ice thickness.
Remove all ice from the storage bin.
Ice cubes in any given batch will vary, so it is necessary
to choose cubes from the sample area for comparison
when making adjustments.
The ice cube thickness is factory set for best overall
performance. The factory setting "0" is designed to
maintain an ice bridge of approximately 1/16" to 1/8"
(1.6 mm to 3.2 mm) under normal conditions, resulting in
a dimple of approximately 1/4" to 1/2" (6.4 mm to
12.7 mm) in depth. A fuller cube with less of a dimple
results in a thicker ice bridge. As the ice bridge thickens,
the tendency for the cubes to stay together as a slab
increases. A bridge thicker than 1/8" (3.2 mm) may cause
cubes to overfill the ice bucket.
ICE BRIDGE
Ice Bridge and Dimples
Your clear ice machine is pre-set to produce ice between
the optimal dimensions illustrated below:
(6.4 mm to 12.7 mm)
DIMPLES
Cube Types
1/4" TO 1/2"
DIMPLE
THIN BRIDGE
LITTLE OR
DEEP DIMPLE
NO DIMPLE
u-line.com
1/16" TO 1/8"
(1.6 mm to 3.2 mm)
ICE BRIDGE
THICK BRIDGE
Ice 1