Makita 9237CB Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1 Armature (cont.)
DISASSEMBLING
(2) Remove Armature from Gear housing complete as drawn in Fig. 3.
Fig. 3
1. Remove M5x12 Pan head screw from Bearing
box side of Gear housing complete.
Remove M5x16 Pan head screw from the top
side of Gear housing complete.
Bearing
box side
M5x12 Pan
head screw
(3) Remove Bearing retainer 48 and Ball bearings from Armature as drawn in Fig. 4.
Fig. 4
1. Remove Retaining ring S-12 from
Armature shaft end using with 1R291.
Retaining
ring S-12
Ball bearing
6201LLB
Bearing retainer 48
3. Remove Bearing retainer 48 from
assembly.
Top side
M5x16 Pan
head screw
2. Remove Ball bearing 6201LLB from Armature assembly
Armature
Bearing retainer 48
Ball bearing
6201LLB
2. Pull out Armature section from Gear housing
complete.
Gear housing
complete
while gripping the legs of 1R269 with Water pump pliers.
Water pump pliers
Ball bearing 6201LLB
4. Remove Ball bearing 608LLB from the commutator end
of Armature assembly using with 1R269.
And then, remove Insulation washer.
Ball bearing 608LLB
Insulation washer
P 4/ 14
Armature
Leg of 1R269