Makita 9237CB Technical Information page 13

W
iring diagram for 9237CB
Fig. D-8
Field lead wire (black) and Brush holder's lead wire (orange) are guided out through
the right bottom opening of Name plate side.
Fig. D-9
5 4
Lock button
Receptacle covered with tube
has to be connected to the
terminal on Lock button side.
Wiring from Motor housing set
Wiring to Switch's Terminals
Connect the receptacles of Controller's lead wires to Switch terminals
so that Lead wires come to the reverse side of Lock button.
And tilt the connected receptacles as drawn left.
3
Switch trigger
Field lead wire (black)
Brush holder's lead wire (orange)
Name plate
1
Connect Receptacles to Switch terminals 1
while facing the connecting area of Lead wires
to the reverse side of Switch trigger.
P 13/ 14