Lexmark CS310 Service Manual page 58

23y paper jam messages
Error code Description
230.xx A single page of media is jammed at the inner
door.
Multiple pages of media are jammed at the
inner door.
230.01 The Duplex (S1) sensor is obstructed.
230.02 The Duplex (S1) sensor was made early.
230.03 The Duplex (S1) sensor did not make.
230.06 No media in duplexer.
232.xx Paper jam at input sensor.
232.02 The input (S2) sensor was made early while
duplexing.
232.03 The input (S2) sensor did not make while
duplexing.
232.05 The input (S2) sensor did not break while
duplexing.
Duplex/manual feed sensor (S1) service check
Actions
Step 1
Is the printer setting on a hard, flat surface?
Step 2
Enter Diagnostics Menu.
For CS310 models, turn the printer off, press and hold Down and Right,
turn the printer on, and then release the buttons when the installed
memory and processor speed displays.
For CS410 and CS510 models, turn the printer off, press and hold 3 and
6, turn the printer on, and then release the buttons when the installed
memory and processor speed displays).
Perform the Base Sensor Test. See
a
Select Base Sensor Test, and press Select.
b
Select S1, and press Select.
c
Install tray 1.
Does the display indicate InputS1‑Media Clear...?
"BASE SENSOR TEST" on page
Diagnostic information
58
Action
Go to "Duplex/manual feed sensor (S1) service check" on
page 58.
Go to "Duplex/manual feed sensor (S1) service check" on
page 58.
Go to "Duplex/manual feed sensor (S1) service check" on
page 58.
Go to "Duplex/manual feed sensor (S1) service check" on
page 58.
Go to "Duplex/manual feed sensor (S1) service check" on
page 58.
Go to "Duplex/manual feed sensor (S2) service check" on
page 60.
Go to "Duplex/manual feed sensor (S2) service check" on
page 60.
Go to "Duplex/manual feed sensor (S2) service check" on
page 60.
Go to "Duplex/manual feed sensor (S2) service check" on
page 60.
Yes
Go to step 2.
Go to step 3.
176.
5027
No
Make sure the printer is
setting on a level, flat
surface
Go to step 5.