Axis Q1602 Installation Manual page 12

Page 12
Enter the password as set above, and click OK. If the password is lost, the camera must be reset
5.
to the factory default settings. See page 19.
6. AXIS Q1604: Capture mode is set the first time the
product is accessed. Select the desired capture mode
and click OK. Select the capture mode with the power
line frequency (50 Hz or 60 Hz) used at the location of
the Axis product and click OK. When using 50 Hz, the
maximum frame rate is limited to 25 fps.
Note:
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually
used; most other parts of the world use 50 Hz. Local variations may apply; always check with the
local authorities.
7. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video
stream in Internet Explorer. You will need administrator rights on the computer to do this.
Note:
To install AMC in Windows Vista, you must run Internet Explorer as administrator. Right-click the
Internet Explorer icon and select Run as administrator.
8. The Live View page of the network camera is displayed; the Setup link leads to menus that
allow you to customize the camera.
AXIS Q1602/Q1604 Network Camera Installation Guide
Setup – Provides all the tools
for configuring the camera to
requirements.
Help – Displays online help
on all aspects of using the
camera.