Axis Q1659 Installation Manual
Hide thumbs
Also See for Q1659:
- User manual (62 pages) ,
- User manual (17 pages) ,
- User manual (16 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Axis Q1659
Summary of Contents for Axis Q1659
- Page 1 AXIS Q1659 Network Camera Installation Guide...
- Page 2 Low Voltage (LVD) Directive 2014/35/EU. See Safety Every care has been taken in the preparation of this on page 3 . document. Please inform your local Axis office of any • Restrictions of Hazardous Substances (RoHS) Directive inaccuracies or omissions. Axis Communications AB cannot 2011/65/EU.
- Page 3 자 또는 사용자는 이 점을 주의하시기 바라며, 가 Search by product, category, or phrase 정외의 지역에서 사용하는 것을 목적으로 합니다. • report problems to Axis support staff by logging in to 적절히 접지된 STP (shielded twisted pair) 케이블 your private support area 을 사용하여 제품을 연결 하십시오.
-
Page 4: Table Of Contents
Installation Guide Table of Contents Package contents ..........Hardware overview . -
Page 5: Package Contents
AXIS Q1659 Network Camera Package contents • AXIS Q1659 Network Camera (with body cap) • 2–pin connector block for power input • 4–pin I/O connector block for connecting external devices • 2–pin RS485/422 connector block (x2) • Printed materials Installation Guide (this document) -
Page 6: Hardware Overview
AXIS Q1659 Network Camera Hardware overview For specifications of the hardware components, see Technical specifications on page 13. Product overview EF lens mount index EF-S lens mount index EF mount Unlock button Network connector (PoE) Power connector (DC input) microSD Card slot... - Page 7 AXIS Q1659 Network Camera 10 RS485/RS422 connector 11 Control button 12 I/O connector 13 Audio in 14 Audio out 15 Camera mount 16 Grounding screw...
-
Page 8: How To Install The Product
Hardware overview on page 6 9. Fasten the camera to a wall mount or a holder. How to mount the lens NO TICE TICE TICE For more details on compatible lenses, see www.axis.com. - Page 9 AXIS Q1659 Network Camera 1. Remove the rear lens cap and the body cap. 2. Mount the lens by aligning the lens’ red or white mount index with the camera’s mount index of the same color. 3. Set the lens’s focus mode switch to AF (autofocus).
-
Page 10: How To Access The Product
How to access the product AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products on the network and assigning them IP addresses in Windows®. Both applications are free and can be downloaded from www.axis.com/techsup The product can be used with the following browsers: ®... -
Page 11: Reset To Factory Default Settings
AXIS Q1659 Network Camera Reset to Factory Default Settings Important Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values. Note The installation and management software tools are available from the support pages on www.axis.com/techsup... -
Page 12: Further Information
The user manual is available at www.axis.com • To check if there is updated firmware available for your product, see www.axis.com/support • For useful online trainings and webinars, see www.axis.com/academy Optional accessories For a complete list of available accessories for this product, go to www.axis.com... -
Page 13: Technical Specifications
SD card. Use your fingers to insert and remove the card. • Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or unmount the SD card from the Axis product’s webpages before removal. -
Page 14: Connectors
(shown under System Options > Ports & Devices). 4–pin terminal block Audio connector The Axis product has the following audio connectors: • Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal. •... - Page 15 AXIS Q1659 Network Camera 3.5 mm audio connectors (stereo) 1 Tip 2 Ring 3 Sleeve Audio Input Ground Microphone/Line in Audio Output Ground Line out, mono (stereo Line out, mono (stereo connector compatible) connector compatible) Power connector 2-pin terminal block for DC power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either a rated output power limited to ≤100 W or a rated output current limited to ≤5 A.
- Page 16 AXIS Q1659 Network Camera Function Notes RS485B alt RX pair for all modes (combined RX/TX for 2-wire RS485) RS485/422 RX(B) RS485A alt RS485/422 RX(A) TX pair for RS422 and 4-wire RS485 RS485/RS422 TX(B) RS485/RS422 TX(A) Important The recommended maximum cable length is 30 m (98.4 ft).
-
Page 17: Safety Information
AXIS Q1659 Network Camera Safety information Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference. Hazard levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. -
Page 18: Safety Instructions
• When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product. Battery The Axis product uses a 3.0 V BR2330 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years. - Page 19 WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis. • Dispose of used batteries according to local regulations or the battery manufacturer's instructions.
- Page 20 Installation Guide Ver. M2.2 AXIS Q1659 Network Camera Date: September 2016 © Axis Communications AB, 2016 Part No. 1624823...