Belkin F1DD102U Quick Installation Manual page 5

2
Powering up the KVM Switch
1. Connect the included 9V DC, 1A power supply adapter into an available
power outlet.
2. Attach the barrel into the power jack on the KVM Switch to power
the unit. The LEDs should illuminate. (Fig. 4)
Fig. 4
3
Connecting the Computers to the KVM Switch
1. Power up the computers. Once the operating system has loaded, connect
the USB KVM cable from your computer's USB port to the USB port on the
KVM Switch. The operating system will automatically install the KVM Switch.
Do this for all USB connections. (Fig. 5)
2. Shut down your computer. Take the DVI cable and connect the male end of
the cable to the DVI port on the back of the computer. Connect the male
end of the DVI cable to the back of the KVM Switch for CPU1. Do this for
all computers. (Fig. 5)
Fig. 5