Advertisement
A further change has been made to the original fan C00207723 (1703002) this has been replaced in service by a fan that is shorter
in length to 72mm part code C00095599. The fitting of this fan does not effect the performance of the condenser drying process.
For 'C' Energy models a change has also been made in production to the fan as fitted from serial number 60907.0001 C00199451
(1703672) this has been replaced by a fan that is shorter in length 72mm part code C00272335. The fitting of this fan does not
affect the performance of the condenser drying process.
MOTOR
The service motor type 351 part code C00194688 is used for replacement to all production and is supplied as a kit including the
later version fan C00272335 and an 8uf capacitor
Click "View List" below to Select Parts
n4407c00: Silnik sprê¿arki
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Od numeru seryjnego 60907.0001 zmieniono silnik suszarki kondensacyjnej oraz wentylator ch³odz¹cy. Zmieniono sposób
wk³adania/mocowania wentylatora ch³odz¹cego.
Nowy wentylator ch³odz¹cy i silnik nie s¹ wzajemnie wymienne z modelami o numerach ni¿szych ni¿ 60907.0001.
Do wymiany silnika dostêpny jest zestaw, obejmuj¹cy najnowszy silnik, kondensator 8uf oraz najnowszy wentylator ch³odz¹cy.
Ten zestaw silnika mo¿e byæ montowany na modelach o numerach zarówno ni¿szych jak i wy¿szych ni¿ numer seryjny
60907.0001, pod warunkiem, ¿e wszystkie czêœci w zestawie bêd¹ wymienione.
n4407l00: BRACE FITTED TO VENTED MODELS REAR PANEL
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BRACE FITTED TO VENTED MODELS REAR PANEL
A Brace has been fitted to all current Vented Tumble Dryers from Serial Number 71210.0000
The Brace can be fitted to Machines before Serial Number 71210.0000 providing the Rear Panel is replaced as well. The Brace is
secured to the Rear panel by 2 screws.
See Parts List for required parts.
n4408e00: CONDENSER DOOR CATCH/LATCH CHANGES
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
INTRODUCTION OF EMZ DOOR CATCH/LATCH
mod.IS70C
page 18
Advertisement
