Placing Originals For Scanning - Epson stylus CX4100 series User Manual

Placing Originals for Scanning

Caution: Do not place heavy objects on the document table glass and do not
press the glass with too much force.
1. Open the document cover and place your original face-down on the glass, in the
upper left corner. Move your original about 1 mm (0.04 inch) away from the top
and left edges so all of it will be scanned.
2. Close the document cover gently so that your original does not move.
Caution: Never open the document cover beyond where it stops and do not
place heavy objects on top of the Stylus CX all-in-one.
Note: If you are scanning a large or thick document, you can remove the
document cover. See Placing Large or Thick Documents for instructions.
To scan your document or photo, see Starting EPSON Scan.
35