Miscellaneous Printout Problems - Epson stylus CX4100 series User Manual

Paper doesn't feed correctly or jams in the printer.
■
If paper doesn't feed, remove it from the sheet feeder. Reload it against the right
edge, behind the tabs, then slide the left edge guide against the paper. Make sure
the paper is not in front of the feeder guard.
■
If multiple pages feed at once, remove the paper from the sheet feeder, fan the
edges to separate the sheets, then reload it.
■
Don't load too many sheets at once (up to 20 sheets of photo paper or 100 sheets
of plain paper). See Special Papers for details.
■
Heavily saturated prints may curl, causing a paper jam when printing on both
sides of the paper.
■
If paper is jammed, the red
1. Press the
is not ejected, go to the next step.
2. If the paper is stuck near the sheet feeder or output tray, gently pull it out.
If the paper is stuck inside the Stylus CX, press the
Open the scanner and remove any paper inside, including any torn pieces. Do not
pull it backward however; this can damage the sheet feeder. Close the scanner,
then turn the Stylus CX back on.
If your paper loads incorrectly or jams frequently:
■
Use new, smooth, high-quality paper, loaded printable side up.
■
Fan the edges of the stack of paper to separate the sheets.
■
Don't load paper above the arrow mark inside the left edge guide.
■
Place the paper against the right edge behind the tab. Slide the left edge guide
against it, but not too tightly.
■
If you're printing on both sides of the paper, try loading fewer sheets.

Miscellaneous Printout Problems

The image is inverted, as if viewed in a mirror.
■
Turn off the mirror setting in your application program.
105
Error
button to eject the jammed paper. If the jammed paper
tart Color
S
light flashes. Follow these steps to clear the jam:
button to turn it off.
On