Technical Specifications - Axis q1765-le User Manual

AXIS Q1765-LE Network Camera

Technical Specifications

Technical Specifications
Camera
Image sensor Progressive scan RGB CMOS 1/2.9"
Lens 4.7-84.6 mm, F1.6-2.8
Autofocus, Automatic day/night
Horizontal angle of view: 59°–4°
Day and night Automatically removable infrared-cut filter in day mode and infrared-pass filter 720 nm in night mode
Minimum Color: 0.5 lux at 30 IRE F1.6
illumination B/W: 0.04 lux at 30 IRE F1.6, 0 lux with IR illumination on
Shutter time
1/28000 s to 2 s
Video
Video
H.264 (MPEG-4 Part 10/AVC) Mainline and Baseline Profiles
compression
Motion JPEG
1920x1080 to 160x90
Resolutions
Frame rate
Up to 25/30 fps (50/60 Hz) in all resolutions
Video Multiple, individually configurable streams in H.264 and Motion JPEG
streaming
Controllable frame rate and bandwidth
VBR/CBR H.264
Image settings Manual shutter time, Compression, Color, Brightness, Sharpness, White balance, Exposure control, Exposure zones,
Backlight compensation, WDR-Dynamic Contrast, Fine tuning of behavior at low light, Rotation, Text and image
overlay, 3D privacy mask, Day/night shift level
Axis' Corridor Format
Pan/Tilt/Zoom 18x optical zoom and 12x digital zoom, Preset positions
Audio
Audio Two-way
streaming
Audio
AAC-LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, Configurable bit rate
compression
Audio
Requires multi-connector cable (not included) for external microphone input or line input and line output
input/output
Audio input
3.5 mm jack for mic/line in, max 200 mVpp for microphone, max 6.2 Vpp for line signal
Impedance: Min 1 kΩ, Mic-Power activated; Min 4 kΩ line
Tip: Signal/Bias
Ring: Bias
Sleeve: Ground
Power to external electret microphone: 1.3 – 2.6 V DC (3.0 V DC through 2130 Ω)
SNR: > 70 dB
Audio output 3.5 mm jack for line out, max 2.0 Vpp
SNR: > 70 dB
Tip: Signal/Bias
Ring: Bias
Sleeve: Ground
Output impedance: Max 100 Ω, normal < 1Ω
Network
64