Output Buttons - Axis q1765-le User Manual

Hide thumbs Also See for q1765-le:

Table of Contents

AXIS Q1765-LE Network Camera

Configure the Live View Page

Output Buttons

External I/O devices connected to the Axis product's output ports can be controlled directly from the Live View page.

Note

To enable this setting at least one I/O port must be configured as an output port. See I/O Ports on page 55.

To display output buttons in the Live View page:

1. Go to Setup > Live View Config.

2. Under Output Buttons, select the type of control to use:

Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60

seconds.

Active/Inactive displays two buttons, one or each action.

To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port's Normal state.

Note

A multi-connector cable (available from Axis) is required when connecting external I/O devices to the Axis product. See

Multi-Connector Cable (sold separately) on page 59

Table of Contents