Sending a Fax: Auto Dialling
Using an auto-dial number to
send a fax
1
Load the document(s).
If desired, press
resolution and/or contrast.
2
Dial the fax number using one of the
methods below:
•
Rapid Key Dialling: If the number is
assigned to a Rapid Key, press the
Rapid Key.
•
Using the phonebook: Press
F
, and then
the name or number of the other
party appears in the display (names
will appear in alphabetical order).
To go directly to names that begin
with a particular letter, press the
appropriate number key one or more
times to enter that letter (see page
7).
When the desired destination
appears, press
•
Direct keypad dialling: Press the
number keys to enter a full fax
number (to insert a pause between
F
digits, press
). When finished,
START
press
.
3
Dialling and transmission will take
place automatically.
to set the
F F
F
or
until
START
.
Sending a Fax: Auto Dialling
•
To cancel transmission, press
.
•
If the transmission is completed
successfully, the machine will beep
once.
•
If an error occurs, the machine will
beep three times.
Redial
The machine retains the most recent 20
numbers that have been dialled. You
can automatically redial any of these
numbers.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Press
.
F
Display: [<REDIAL>]
3
If needed, press
until the desired number appears in
the display.
START
4
Press
. Dialling begins.
•
Make sure the desired number
appears before pressing
redialling will not take place
(sometimes it takes several seconds
for the number to appear).
to set the
F F
F
or
START
, or
23