Sharp UX-A760 Operation Manual page 23

•
If you are on a Flash-type PBX and
are storing a number for an outside
line, press R , press
a pause, and then enter the fax or
voice number. (When you dial the
auto-dial number, you will
automatically dial out without the
need to press the
•
If you are storing a fax/phone
number for an outside line and are
on a PBX that requires dialing a
number to dial out, enter the number
to dial out, press
pause, and then enter the fax/phone
number. (When you dial the auto-dial
number, you will automatically dial
out without the need to dial the
number for an outside line.)
START
5
Press .
6
Press to exit.
Printing the TEL # LIST
To print a list showing the fax and
phone numbers stored in the
phonebook, press
and then to select YES.
F
to insert
R key.)
F
to insert a
F
, , ,
Storing Numbers
Assigning a number in the
phonebook to a Rapid Key
You can assign your most frequently
dialled numbers to the Rapid Keys.
Three Rapid Keys are available.
♦
When a number is assigned to a
Rapid Key, it can be dialled by simply
pressing the Rapid Key.
♦
To assign a number to a Rapid Key,
the number must first be stored in the
phonebook (page 20).
Follow the steps below to assign a
number in the phonebook to a Rapid
Key.
1
F
Press , and then press
F
or until the number you wish
to assign to a Rapid Key appears.
2
Press the Rapid Key that you wish
to assign the number to.
Example:
Changing the number assigned to a
Rapid Key: To change the number
assigned to a Rapid Key, simply repeat
the steps above to assign the new
number to the Rapid Key. The new
number will replace the old number.
Clearing a Rapid Key: To clear a
number from a Rapid Key, hold down
the Rapid Key until [CLEARED]
appears in the display.
F F
21